Testing
Plumbing

  • Gallery View
Sort By:
Results/Page:
Page
of 2
     
Quick Info
TEST BALL 4 CHERNE

TEST BALL 4 CHERNE

Single-Size Test-Ball&reg Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests

Quick Info
MANOMETER CHERNE

MANOMETER CHERNE

Manometer Used for testing gas lines and DWV pipe Measures water columns from 0" to 16" Reads in increments of 1/10"

Quick Info
TC1 1-1/2" TECHNO CAP HEAVY DUTY

TC1 1-1/2" TECHNO CAP HEAVY DUTY

Features &bull Heavy duty PVC, high pressure test cap &bull For 1 1/2", 2", 3", and 4" DWV pipe &bull One model can be solvent welded on PVC and one on ABS pipe &bull Will not clog or fall into pipe &bull Can be tested up to 40' of water of 17 psig

Quick Info
TC2 2" TECHNO CAP HEAVY DUTY TEST CAP

TC2 2" TECHNO CAP HEAVY DUTY TEST CAP

Features &bull Heavy duty PVC, high pressure test cap &bull For 1 1/2", 2", 3", and 4" DWV pipe &bull One model can be solvent welded on PVC and one on ABS pipe &bull Will not clog or fall into pipe &bull Can be tested up to 40' of water of 17 psig

Quick Info
TC3 3" TECHNO CAP HEAVEY DUTY TEST CAP

TC3 3" TECHNO CAP HEAVEY DUTY TEST CAP

Features &bull Heavy duty PVC, high pressure test cap &bull For 1 1/2", 2", 3", and 4" DWV pipe &bull One model can be solvent welded on PVC and one on ABS pipe &bull Will not clog or fall into pipe &bull Can be tested up to 40' of water of 17 psig

Quick Info
TC4 4" TECHNO CAP HEAVEY DUTY TEST CAP

TC4 4" TECHNO CAP HEAVEY DUTY TEST CAP

Features &bull Heavy duty PVC, high pressure test cap &bull For 1 1/2", 2", 3", and 4" DWV pipe &bull One model can be solvent welded on PVC and one on ABS pipe &bull Will not clog or fall into pipe &bull Can be tested up to 40' of water of 17 psig

Quick Info
TEST PLUG 1-1/2 MECHANICAL

TEST PLUG 1-1/2 MECHANICAL

TestTitan&trade Test Devices Proven performance, improved design For use in both pipe end and cleanout threads &ndash size specific Hollow, male hose thread stem allows for fill/drain through the plug Non-slip shoulder prevents spinning 100% non-corrosive, strong and durable

Quick Info
TEST PLUG 3 MECHANICAL

TEST PLUG 3 MECHANICAL

TestTitan&trade Test Devices Proven performance, improved design For use in both pipe end and cleanout threads &ndash size specific Hollow, male hose thread stem allows for fill/drain through the plug Non-slip shoulder prevents spinning 100% non-corrosive, strong and durable

Quick Info
882-35 TEST PLUG 3-1/2 MECHANIC

882-35 TEST PLUG 3-1/2 MECHANIC

TestTitan&trade Test Devices Proven performance, improved design For use in both pipe end and cleanout threads &ndash size specific Hollow, male hose thread stem allows for fill/drain through the plug Non-slip shoulder prevents spinning 100% non-corrosive, strong and durable

Quick Info
TEST PLUG 2 KNOCKOUT

TEST PLUG 2 KNOCKOUT

Knockout Test Plug and Cap Miscellaneous Standard knockout test plugs solvent weld into PVC or ABS Sch. 40 pipe Dual fit knockout test caps solvent weld over 1&frac12" and 2", or 3" and 4" PVC or ABS Sch. 40 pipe

Quick Info
TEST PLUG 4 KNOCKOUT

TEST PLUG 4 KNOCKOUT

Knockout Test Plug and Cap Miscellaneous Standard knockout test plugs solvent weld into PVC or ABS Sch. 40 pipe Dual fit knockout test caps solvent weld over 1&frac12" and 2", or 3" and 4" PVC or ABS Sch. 40 pipe

Quick Info
881-10 1-1/2" GRIP TIP TEST PLG

881-10 1-1/2" GRIP TIP TEST PLG

GripTip&trade Test Devices Patent # 6,769,291 Tip acts as a handle while applying glue and can be snipped to allow filling and bleeding with water or air for testing Deeper glue surface ensures a good seal, especially on unevenly cut pipe Durable, ABS may be glued to pipe with all-purpose glue High-visibility models make installed plugs and caps easy to see for ensured removal Test nipple is 5/8" O.D. for connection to compression fittings

Quick Info
881-12 2" GRIP TIP TEST PLUG

881-12 2" GRIP TIP TEST PLUG

GripTip&trade Test Devices Patent # 6,769,291 Tip acts as a handle while applying glue and can be snipped to allow filling and bleeding with water or air for testing Deeper glue surface ensures a good seal, especially on unevenly cut pipe Durable, ABS may be glued to pipe with all-purpose glue High-visibility models make installed plugs and caps easy to see for ensured removal Test nipple is 5/8" O.D. for connection to compression fittings

Quick Info
TEST PLUG 3 KNOCKOUT

TEST PLUG 3 KNOCKOUT

Knockout Test Plug and Cap Miscellaneous Standard knockout test plugs solvent weld into PVC or ABS Sch. 40 pipe Dual fit knockout test caps solvent weld over 1&frac12" and 2", or 3" and 4" PVC or ABS Sch. 40 pipe

Quick Info
640X12 1/2 PEX POLY TEST PLUG

640X12 1/2 PEX POLY TEST PLUG

PowerPEX AccuCrimp Plug Tabs perfectly position crimp ring or sleeve over sealing barbs every time

Quick Info
TUB WASTE PLUG

TUB WASTE PLUG

Tub Waste &amp Overflow Plugs Used to isolate bath wastes for air/water testing. natural rubber gasket creates air-tight seal. For use on center hole drains overflow. Yellow ABS plastic ensures easy job site recognition. 3/8" Drain thread. 1/4" Overflow thread

Quick Info
TEST GAUGE 0-15 PSI CHERNE

TEST GAUGE 0-15 PSI CHERNE

Gauges with 3/4" FNPT test body 0-15 psi Gauge 2" face 0.1 psi increments

Quick Info
PLUG KWIK N SURE 1-1/2

PLUG KWIK N SURE 1-1/2

Kwik &lsquoN Sure&reg Plugs Works in all types of pipe. Wing nut on 3/8" &ndash 1-1/4" sizes. Hex nut on 1.5" through 5" sizes. Works well for plugging water line stub-outs. Natural rubber O-ring

Quick Info
TEST BALL 1-1/4-1-1/2 CHERNE

TEST BALL 1-1/4-1-1/2 CHERNE

Single-Size Test-Ball&reg Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests

Quick Info
TEST BALL 2 CHERNE

TEST BALL 2 CHERNE

Single-Size Test-Ball&reg Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests

Quick Info
TEST BALL 3 CHERNE

TEST BALL 3 CHERNE

Single-Size Test-Ball&reg Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests

Quick Info
TEST BALL 6 CHERNE

TEST BALL 6 CHERNE

Single-Size Test-Ball&reg Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests

Quick Info
GRIPPER PLUG 3-1/2 CLEAN OUT

GRIPPER PLUG 3-1/2 CLEAN OUT

Clean-Out Gripper&reg Plugs Patented threaded O-ring ensures airtight seal. Stainless steel hardware prevents corrosion. Black color blends well with cast-iron pipe. NPT-sized, including hard-to-find 3-1/2". Guaranteed to seal all damaged threads. Made with glass-reinforced ABS plastic and natural rubber O-ring

Quick Info
GRIPPER PLUG 3 CLEAN OUT

GRIPPER PLUG 3 CLEAN OUT

Clean-Out Gripper&reg Plugs Patented threaded O-ring ensures airtight seal. Stainless steel hardware prevents corrosion. Black color blends well with cast-iron pipe. NPT-sized, including hard-to-find 3-1/2". Guaranteed to seal all damaged threads. Made with glass-reinforced ABS plastic and natural rubber O-ring

Displaying: 1 - 24 of 30 results
 
 
 
Go Top