Testing
Plumbing
Narrow Your Results
Testing
- Gallery View
| Page of 2 |
882-110 AIR TEST GAUGE KIT
Item No. SC882110
Test Assemblies Gauges & Accessories Combination Air & Water &ndash ¾" female hose swivel Combination Air & Water &ndash Schrader valve and ¼-turn valve Air Test Fitting &ndash 5/8" O.D. comp × Schrader valve Water Pressure Test Fitting &ndash ¾" brass female hose swivel connection Water Pressure Test Fitting &ndash Drag pointer indicator for overnight tests
TEST BALL 4 CHERNE
Item No. CN270040
Single-Size Test-Ball® Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests
MANOMETER CHERNE
Item No. CN010205
Manometer Used for testing gas lines and DWV pipe Measures water columns from 0" to 16" Reads in increments of 1/10"
TC1 1-1/2" TECHNO CAP HEAVY DUTY
Item No. TC1-112
Features &bull Heavy duty PVC, high pressure test cap &bull For 1 1/2", 2", 3", and 4" DWV pipe &bull One model can be solvent welded on PVC and one on ABS pipe &bull Will not clog or fall into pipe &bull Can be tested up to 40' of water of 17 psig
TC2 2" TECHNO CAP HEAVY DUTY TEST CAP
Item No. TC2-2
Features &bull Heavy duty PVC, high pressure test cap &bull For 1 1/2", 2", 3", and 4" DWV pipe &bull One model can be solvent welded on PVC and one on ABS pipe &bull Will not clog or fall into pipe &bull Can be tested up to 40' of water of 17 psig
TC3 3" TECHNO CAP HEAVEY DUTY TEST CAP
Item No. TC3-3
Features &bull Heavy duty PVC, high pressure test cap &bull For 1 1/2", 2", 3", and 4" DWV pipe &bull One model can be solvent welded on PVC and one on ABS pipe &bull Will not clog or fall into pipe &bull Can be tested up to 40' of water of 17 psig
TC4 4" TECHNO CAP HEAVEY DUTY TEST CAP
Item No. TC4-4
Features &bull Heavy duty PVC, high pressure test cap &bull For 1 1/2", 2", 3", and 4" DWV pipe &bull One model can be solvent welded on PVC and one on ABS pipe &bull Will not clog or fall into pipe &bull Can be tested up to 40' of water of 17 psig
TEST PLUG 1-1/2 MECHANICAL
Item No. SC8821
TestTitan&trade Test Devices Proven performance, improved design For use in both pipe end and cleanout threads &ndash size specific Hollow, male hose thread stem allows for fill/drain through the plug Non-slip shoulder prevents spinning 100% non-corrosive, strong and durable
TEST PLUG 3 MECHANICAL
Item No. SC8823
TestTitan&trade Test Devices Proven performance, improved design For use in both pipe end and cleanout threads &ndash size specific Hollow, male hose thread stem allows for fill/drain through the plug Non-slip shoulder prevents spinning 100% non-corrosive, strong and durable
882-35 TEST PLUG 3-1/2 MECHANIC
Item No. SC88235
TestTitan&trade Test Devices Proven performance, improved design For use in both pipe end and cleanout threads &ndash size specific Hollow, male hose thread stem allows for fill/drain through the plug Non-slip shoulder prevents spinning 100% non-corrosive, strong and durable
TEST PLUG 2 KNOCKOUT
Item No. SC8812
Knockout Test Plug and Cap Miscellaneous Standard knockout test plugs solvent weld into PVC or ABS Sch. 40 pipe Dual fit knockout test caps solvent weld over 1½" and 2", or 3" and 4" PVC or ABS Sch. 40 pipe
TEST PLUG 4 KNOCKOUT
Item No. SC8814
Knockout Test Plug and Cap Miscellaneous Standard knockout test plugs solvent weld into PVC or ABS Sch. 40 pipe Dual fit knockout test caps solvent weld over 1½" and 2", or 3" and 4" PVC or ABS Sch. 40 pipe
881-10 1-1/2" GRIP TIP TEST PLG
Item No. SC88110
GripTip&trade Test Devices Patent # 6,769,291 Tip acts as a handle while applying glue and can be snipped to allow filling and bleeding with water or air for testing Deeper glue surface ensures a good seal, especially on unevenly cut pipe Durable, ABS may be glued to pipe with all-purpose glue High-visibility models make installed plugs and caps easy to see for ensured removal Test nipple is 5/8" O.D. for connection to compression fittings
881-12 2" GRIP TIP TEST PLUG
Item No. SC88112
GripTip&trade Test Devices Patent # 6,769,291 Tip acts as a handle while applying glue and can be snipped to allow filling and bleeding with water or air for testing Deeper glue surface ensures a good seal, especially on unevenly cut pipe Durable, ABS may be glued to pipe with all-purpose glue High-visibility models make installed plugs and caps easy to see for ensured removal Test nipple is 5/8" O.D. for connection to compression fittings
TEST PLUG 3 KNOCKOUT
Item No. SC8813
Knockout Test Plug and Cap Miscellaneous Standard knockout test plugs solvent weld into PVC or ABS Sch. 40 pipe Dual fit knockout test caps solvent weld over 1½" and 2", or 3" and 4" PVC or ABS Sch. 40 pipe
640X12 1/2 PEX POLY TEST PLUG 50/BAG
Item No. SC640X12
PowerPEX AccuCrimp Plug Tabs perfectly position crimp ring or sleeve over sealing barbs every time
TUB WASTE PLUG
Item No. CN012678
Tub Waste & Overflow Plugs Used to isolate bath wastes for air/water testing. natural rubber gasket creates air-tight seal. For use on center hole drains overflow. Yellow ABS plastic ensures easy job site recognition. 3/8" Drain thread. 1/4" Overflow thread
TEST GAUGE 0-15 PSI CHERNE
Item No. CN024568
Gauges with 3/4" FNPT test body 0-15 psi Gauge 2" face 0.1 psi increments
PLUG KWIK N SURE 1-1/2
Item No. CN269891
Kwik &lsquoN Sure® Plugs Works in all types of pipe. Wing nut on 3/8" &ndash 1-1/4" sizes. Hex nut on 1.5" through 5" sizes. Works well for plugging water line stub-outs. Natural rubber O-ring
TEST BALL 1-1/4-1-1/2 CHERNE
Item No. CN270016
Single-Size Test-Ball® Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests
TEST BALL 2 CHERNE
Item No. CN270024
Single-Size Test-Ball® Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests
TEST BALL 3 CHERNE
Item No. CN270032
Single-Size Test-Ball® Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests
TEST BALL 6 CHERNE
Item No. CN270067
Single-Size Test-Ball® Plugs Natural rubber body provides excellent expansion and a great seal in round and out-of-round pipe Inflatable design can fit through test tees, sanitary tees, floor drains and other hard to access pipe openings Ideal for testing DWV plumbing systems at pressures up to 13 psi or with 30 ft. of head pressure Utilizes a standard tire air fitting for easy connections Ring and chain assembly helps prevent the plug from being drawn into DWV systems during tests
GRIPPER PLUG 3-1/2 CLEAN OUT
Item No. CN270138
Clean-Out Gripper® Plugs Patented threaded O-ring ensures airtight seal. Stainless steel hardware prevents corrosion. Black color blends well with cast-iron pipe. NPT-sized, including hard-to-find 3-1/2". Guaranteed to seal all damaged threads. Made with glass-reinforced ABS plastic and natural rubber O-ring
