Supports
Plumbing
Narrow Your Results
Supports
Mfr / Trade Name
- Gallery View
| Page of 3 |
523-2404 1 BRKT 6 DRILL TIP SCR
Item No. SC5232404
Universal Slider Bracket 1 bracket, 6 drill-tip screws
533-1 STUD SHOE SINGLE
Item No. SC533-1
16-gauge Formed rib provides added strength Installs over pipe up to 2-3/8" O.D. Meets IRC 602.6 'A' dimension 1.58"
533-2 STUD SHOE DOUBLE
Item No. SC533-2
6-gauge Formed rib provides added strength Installs over pipe up to 2-3/8" O.D. Meets IRC 602.6 'A' dimension 3.125"
533-3 STUD SHOE TRIPLE
Item No. SC533-3
6-gauge Formed rib provides added strength Installs over pipe up to 2-3/8" O.D. Meets IRC 602.6 'A' dimension 4.7"
549-712 PIPE SUPPORT 1-1/2-2 DWV
Item No. SC549712
DWV Pipe Support 1-1/2"-2" 100% corrosion proof, impact resistant Strong I-beam design to support vent pipe Can be glued to ABS or PVC pipe with all-purpose glue
549-734 PIPE SUPPORT 3-4 DWV
Item No. SC549734
DWV Pipe Support 3"-4" 100% corrosion proof, impact resistant Strong I-beam design to support vent pipe Can be glued to ABS or PVC pipe with all-purpose glue
550-M2 BEND SUPPORT 1/2 FOR PEX
Item No. SC550M2
SideWinder&trade Bend Supports Patent # 6,352,224 Forms tight radius 90° bends in flexible CTS tube without kinking Nail plate models have unique open corner which allows tube to be inserted after the bracket is installed and after tubing end has been plugged Pre-drilled hole for 3/8" (#3) rebar allows installer to use as a ground stake for flexible CTS tube Mount several SideWinders to PowerBar&trade to organize pipes underground before the pour Metal bend for 1/2" PEX
550-M3 3/4 PEX SUPPORT BEND
Item No. SC550M3
SideWinder&trade Bend Supports Patent # 6,352,224 Forms tight radius 90° bends in flexible CTS tube without kinking Nail plate models have unique open corner which allows tube to be inserted after the bracket is installed and after tubing end has been plugged Pre-drilled hole for 3/8" (#3) rebar allows installer to use as a ground stake for flexible CTS tube Mount several SideWinders to PowerBar&trade to organize pipes underground before the pour Metal bend for 3/4" PEX
550-MP2 BEND SUPPORT-1/2 FOR PEX W/ PLATE
Item No. SC550MP2
SideWinder&trade Bend Supports Patent # 6,352,224 Forms tight radius 90° bends in flexible CTS tube without kinking Nail plate models have unique open corner which allows tube to be inserted after the bracket is installed and after tubing end has been plugged Pre-drilled hole for 3/8" (#3) rebar allows installer to use as a ground stake for flexible CTS tube Mount several SideWinders to PowerBar&trade to organize pipes underground before the pour Metal bend for 1/2" PEX with nail plate
554-08 CABLE TIE 8IN 100/PKG
Item No. SC55408
Cable Tie Durable, non-corrosive black nylon Use a #10 screw or nail to secure mounting cable ties
554-36 CABLE TIE 36IN 50/PKG
Item No. SC55436
Cable Tie Durable, non-corrosive black nylon Use a #10 screw or nail to secure mounting cable ties
521-810 STUB OUT BRACKET 1-3/4X20 1/2-3/4-1
Item No. SC521810
Stub Out Bracket Flat Brackets Copper-plated &ndash Extruded models provide four times the soldering surface for extra strength Copper-plated &ndash Heat the tube, not the bracket
523-1624 POWER BAR
Item No. SC5231624
Universal Slider Bracket 1 bracket, 2 TouchDown clamps, 4 drill-tip screws
554-25W HANGER STRAP 5/8X25FT APE TAPE
Item No. SC55425W
Woven Polypropylene Hanger Strap No sharp edges to cut installer's hand or pipe Strong, durable material yet lightweight Max load 125 lbs. Will not fracture in extremely cold temperatures Cut to desired length Install nail or screw at least 1" from end of strap
550-FP2 1/2" CTS FLOOR SUPPORT
Item No. SC550FP2
Straight Floor Sleeve Bend Supports Rigid support for flexible ½" CTS tubing Supports and protects tube through sub floor going directly to the fixture Shorter tube option allows tube support to be concealed with an escutcheon when penetrating finished floor or base cabinet
525-1622 STR ARM W/2 1/2"BLOCKS
Item No. SC5251622
Twisted bracket with two 1/2" Lock Blocks
