Sealants & Lubricants
Electrical

  • Gallery View
Sort By:
Results/Page:
Page
of 2
     
Quick Info
Quick Info
FIRE CAULK 2HR 10-OZ CART 3M

FIRE CAULK 2HR 10-OZ CART 3M

High-performance latex-based intumescent firestop sealant. When properly installed, this product provides up to 4-hour fire protection in tested and listed systems. Firestops items penetrating through fire-rated construction assemblies. Dries to red color, no mixing required. Firestop tested up to 4 hours in accordance with ASTM E 814 U(UL 1479) &amp CAN/ULC S115 Fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079) Helps minimize sound transfer Applied with conventional caulking equipment (excellent caulk rate) Expansive UL and other third-party listed systems Halogen-free Sag-resistant Excellent adhesion Re-enterable/repairable Paintable

Quick Info
TLO-030 A PLUG FUSE TIME DELAY 5814

TLO-030 A PLUG FUSE TIME DELAY 5814

TLO Fuses are medium time-delay Edison-base fuses designed for general-purpose branch-circuit protection. See TOO and SOO fuses for motor protection. Use for replacement purposes only. Applications The National Electric Code now permits Edison-base fuses to be used only for replacements in existing installations, and then, only when there is no evidence of overfusing or tampering. All new Edison-based fuseholders must have Type S fuse adapters installed before they are placed in service. Designed to prevent installation of wrong size fuses, Type S Adapters (SAO series) screw into Edison-base fuseholders so they may accept Type S fuses. Once installed the adapters cannot be removed. To prevent shunting of open fuses or overfusing, and to reduce nuisance fuse opening, it is recommended that SAO adapters with properly rated SLO or SOO series fuses be installed in all Edison-base fuseholders.

Quick Info
TLO-020 A PLUG FUSE TIME DELAY

TLO-020 A PLUG FUSE TIME DELAY

TLO Fuses are medium time-delay Edison-base fuses designed for general-purpose branch-circuit protection. See TOO and SOO fuses for motor protection. Use for replacement purposes only. Applications The National Electric Code now permits Edison-base fuses to be used only for replacements in existing installations, and then, only when there is no evidence of overfusing or tampering. All new Edison-based fuseholders must have Type S fuse adapters installed before they are placed in service. Designed to prevent installation of wrong size fuses, Type S Adapters (SAO series) screw into Edison-base fuseholders so they may accept Type S fuses. Once installed the adapters cannot be removed. To prevent shunting of open fuses or overfusing, and to reduce nuisance fuse opening, it is recommended that SAO adapters with properly rated SLO or SOO series fuses be installed in all Edison-base fuseholders.

Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Displaying: 1 - 24 of 45 results
 
 
 
Go Top